Should you be looking into interior doors for your home, you might have probably noticed there are a lot of different options to choose from, each having some typical settings in which they are utilised. Within this run-down we will attempt to make sense of some of the different varieties of that you may be offered as you consider the appearance you are hoping for in your home interior.
Interior doors can generally be sorted into three simple types – ‘normal’, hinged, sliding and folding – though it should be noted that there is a few overlap between the varieties. We shall examine them briefly here, and hopefully look at the details in the future articles.
Interior hinged doors – These are generally familiar to us all – most interior doors probably still belong to this category. This is the most frequent type, shutting to the doorway and typically only opening in a single direction. Naturally, there are lots of types in this category – full-wood, glass paned, PVC-coated and internal French or double doors. For sheer versatility, easy installation and simplicity you may still in most cases choose a hinged door. Nevertheless they have at least one significant drawback which other kinds of interior door try to redress – they must always swing outwards, and in doing so can occupy valuable space and stay totally impractical for tiny spaces like walk-in closets.
One hinged variety should get special mention here and that is interior French doors, through which we usually refer to internal double doors that swing out, meeting at the center, which is often locked to ensure that just one single ‘wing’ remains being used in that case wished.
Internal folding doors – Interior folding doors aim to address the room issue described above, by folding the doorway in on itself somehow, instead of it swinging out into the room. The other side of the coin is the fact this most frequently means that some space inside the doorway itself is going to be occupied from the folded door, so that you need consider whether this can be acceptable. Due to the reality that they generally travel along a groove they could also be called ‘sliding doors’, although begin to see the main section on sliding doors below for an introduction to the differences. Here are a few basic varieties of internal folding door:
Interior concertina doors – Interior concertina folding doors, sometimes known as, confusingly, as ‘sliding folding doors’, are separated into panels which accumulate when opened and are normally made from lightweight plastic. Also referred to as ‘accordion doors’, particularly in the USA. A particular usage of these folding doors is just as room dividers, wherever you will find a wider doorway or natural dividing feature in a home or work area.
Internal bi-fold or bi-folding doors – These are available in a variety of types, their main characteristic being they only fold along one particular join in the centre but are held in a channel just like a concertina door. These are a type of trade-off in between the concertina door along with a common-or-garden hinged door, since they still stand out a little into the room when stacked, but occupy correspondingly a smaller amount of the doorway by doing this. Internal bi-folding doors are frequently used as wardrobe and closet doors, as well as bathroom rjlldv cabinet doors, but maybe usually are not so frequently used as divisions between rooms inside your home or place of work. When they are, they are generally set up in pairs, to close off a big aperture, or where it is necessary to leave just one single half of the doorway open more often than not, as the other wing from the door stays closed till the whole doorway is put into use.
Note here that UPVC and aluminium bi-folding doors are most commonly used as external doors, leading onto the garden or patio – an issue which we are going to leave for any different article.
Interior sliding doors – Even though many interior folding doors might be classed as sliding doors and do indeed ‘slide’, the phrase is most often used to describe a sliding system with a number of overlapping panels in grooves alongside each other which can slide along to get back most of the door aperture. There are even systems who have a groove running completely clear of the entrance aperture along which a single-wing or perhaps double door may be slid completely free from the doorway. Even though this obviously requires space either side of the doorway, it can make to get a very attractive look.